|
Anti Material Sniper Rifle Type RT-20, cal.20x110mm
|
|
Calibre:
|
20x110mm
|
|
Overall length:
|
1330mm
|
|
Barrel length:
|
920mm
|
|
Muzzle velocity:
|
850 m/s
|
|
Scope:
|
6x42
|
|
Operation:
|
manually operated bolt
|
|
Maximum operational range:
|
2000m
|
|
Mass of the Rifle without bipod and scope:
|
15,1 kg
|
|
Mass of bipod:
|
1,3 kg
|
|
Mass of scope:
|
0,6 kg
|
|
Mass of Rifle with bipod and scope:
|
17 kg
|
|
Mass of backpack:
|
3,2 kg
|
Design features:
- Single shot bolt action weapon
- Manually operated bolt handle on the left of the receiver
- Recoil forces reduction achieved by a recoil compensation tube
- Recoil forces reduction achieved by a high efficiency multi-baffler
- Muzzle brake grate power at cartridge
- One-man operating and transporting
Anti material Rifle Type RT-20, cal.20x110mm, is designed to be used against hostile vehicles, communication centres, command post shelters, logistic centres and similar targets. The rifle can be also used by explosive ordnance disposal teams.
Aiming with the Anti Material Rifle is stabilized by height adjustable bipod. The bipod height can be adjusted from 215 to 295mm.
The recoil produced by 20mm cartridge while firing Anti Material Rifle is absorbed in two ways: a) by recoils compensation tube mounted above the barrel and b) by high efficiency muzzle brake.
The bolt has three sets of locking lugs opened by turning the bolt handle 60°. Once the bolt is moved forward and locked, the AM Rifle can be fired.
About half way down the barrel there is a block with an upwards facing gas port. As the projectile passes this point, some of the propellant gases are topped off and directed along the recoil compensation tube to be vented behind and above the bolt area.
|